Metal sheet processing equipment design and manufacturing enterprise
Round shearing machine feed rack
type
Feeder flip plate/pinch roll/steering wheel
The material
Base and flap: welded steel plate and section steel, PVC plate installed on the flap surface
pinch roll: the upper roller is coated with polyurethane, and the lower roller is coated with hard chrome.
Transition roller: Steel roller surface plated with hard chrome.
Steering wheel: GCr15.
action
The lifting of the flip plate is controlled by the cylinder, the lifting of thepinch roll is controlled by the cylinder, the rotation of the pinch roll is controlled by the deceleration motor, and the width adjustment of the guiding wheel is driven by the hand wheel.
Capacity bearing width: Maximum 2200mm
Feeding speed: maximum 20m/min
power
Feeding motor: 0.75kw reduction motor
Front flip lifting: cylinder φ125×700mm
Rear flip lifting: cylinder φ80×450mm
Roller lifting: cylinder φ80×200mm
note
· The clamping roller is only used in the feeding operation. The upper roller is lifted during work, and the lower roller is installed with the clutch for passive rotation.
· In manual mode, the circular shearing machine can be operated on the operating platform.
Related Products
cnxhkj@vip.163.com
+8618056308262
+8618056308286
Powered by：www.300.cn Hefei SEO