Metal sheet processing equipment design and manufacturing enterprise
Planing machine
Leveling machine:
It is composed of motor, gear box, universal joint, feeding parts, leveling roller assembly, frame, bevel gear lifting mechanism, telescopic transition frame, expected looper and so on.
Leveling machine is used to eliminate coil bending in the process of sheet material repeated bending.
The motor is located in the leveling machine frame, and a small synchronous belt wheel is installed on the motor shaft. The motor is equipped with an encoder to control the feeding speed of the leveling machine, which is connected to the gear box through the synchronous belt drive. The gear box and the leveling roller are connected by universal joint, and the power is transferred to the leveling roller by gear transmission. The lifting of the leveling roller in the leveling roller assembly is manually controlled by the bevel gear lifting mechanism, and can be manually fine-tuned to adjust the pressure between the leveling rollers and ensure the leveling accuracy. The leveler has a set of leveling rollers independently adjusted at the discharge point to calibrate the plate material head.
The sheet material is fed to the leveling roller by the feeding roller. In order to eliminate the bending stress of the roll and achieve the purpose of leveling the sheet, the roll is bent repeatedly through the leveling roller set. Then the material is sent to the wave shear feeding frame by the telescopic transition frame.
Leveling the upper and lower feeding roller, the lower feeding roller is steel roller, the specification is Φ100mm×1338mm, the surface of the tempered hard chrome plating treatment; The feeding roller is a rubber roller, the size is Φ100mm×1338mm, the surface is coated with polyurethane, the hardness is 90 degrees Shaw. The upper feeding roller is controlled by the cylinder. After pressing down, the synchronous gear of the upper feeding roller engages with the synchronous gear of the lower feeding roller to drive the rotation of the upper feeding roller. In this way, both the upper and lower feeding rollers rotate and actively feed. The leveling roller is a steel roller, the specification is Φ50mm×1350mm, quenching HRc50~55, after hard chromium plating treatment.
A feeding operation table is installed on the operating surface of the leveling machine to control the feeding operation of the uncoiling parts and the separate action of the leveling machine.
Related Products
cnxhkj@vip.163.com
+8618056308262
+8618056308286
Powered by：www.300.cn Hefei SEO