Metal sheet processing equipment design and manufacturing enterprise
Wave shearing machine
Waveform plate shearing machine:
It is composed of fuselage, base, fixed length feeding mechanism, clutch assembly, beam component, guide post, cutting motor, quick die changing mechanism and other parts.
When cutting, the reducer motor drives the flywheel to rotate, the crankshaft to rotate, drive the connecting rod on both sides to move up and down, and then drive the upper beam and guide column to move up and down, and the mold fixed on the beam to move up and down, constantly shear the material. The crankshaft flywheel is equipped with a clutch, which can realize the function of quick brake stop.
Fixed length feeding mechanism: the servo motor drives the lower roll to rotate through the reducer, and the upper roll moves up and down through the air bag, which is a passive roll. When feeding, the upper roll presses down the sheet. Through the servo drive, the upper and lower roll clamp the sheet to realize active feeding. Servo motor: 15kw, 1000r/min, Mitsubishi brand; The lower roll is a steel roll, the specification is Φ147.15mm×160mm, the vacuum quenching HRC62 ~ 65, the surface is plated with hard chromium; The upper roller is a rubber roller, the size is Φ138mm×150mm, the surface coated with polyurethane, the hardness is 80 degrees Shaw.
Servo motor feedback line speed, through the touch screen in the main console can set a fixed feeding length.
Feeding width adjusting mechanism of fixed length: the material of different widths is adjusted by the wheel on both sides of the adjusting mechanism to prevent the material from deviating to one side.
The die of this unit operates the surface die from the wave shear head, and adopts the automatic mold pressing mode to lock, the installation and disassembly of the die is simple and quick.
Related Products
cnxhkj@vip.163.com
+8618056308262
+8618056308286
Powered by：www.300.cn Hefei SEO