Metal sheet processing equipment design and manufacturing enterprise
XHV120P-3
I. Overview
1.1, this unit is used for tinplate and aluminum coil unwinding, leveling, waveform shearing special equipment. It is an important equipment to effectively reduce material loss and production cost in the industry of tin printing and lid making. The waveform cutting equipment can save 3-8% of materials.
1.2. The wave shear production line is composed of uncoiler parts, leveler parts, wave shear parts, belt conveyor parts, three receiving table, pinhole detector, electrical control cabinet, etc. The same equipment can be used to cut different waveforms, and the corresponding mold can be replaced by the mold change system. The cutting frequency is 120 times/min, and the equipment is equipped with special micro hole detection equipment: Photomultiplier tube pinhole detector, microhole detection, detection accuracy is high.
1.3. The equipment can be randomly selected between single, double and triple collection.
Ii. Main technical parameters of the unit
2.1. Shear thickness: 0.15 ~ 0.5mm;
2.2. Wave shear width: 600~1200mm;
2.3. Wave shear length: 460 ~ 1200mm;
2.4. Cutting times: 120 times/min (when the cutting length is 800mm);
2.5. Design speed: 96m/min;
2.6. Bearing capacity of receiving table: 2t;
2.7. Height of receiving table: 460mm(including bracket);
2.8. Shear length error: ≤±0.15mm/m;
2.9. Shearing diagonal error: ≤±0.15mm/m;
2.10. Uncoiler expansion shaft diameter range: φ380 ~ φ420mm(coil inner diameter φ405mm);
2.11. Maximum diameter of coil: φ1800mm:;
2.12. Maximum weight of rolling material: 13.5t;
2.13. Installed capacity: about 116kW;
2.14. The production line covers an area of 22.7×5.6 meters.
2.15. Power requirements: three-phase five-wire system 380V±5%, 50Hz±2Hz.
2.16. Air source requirements: Provide air source with prepared pressure of 0.6MPa and flow rate of 1m3/min.
2.17. Hydraulic oil requirements: L-HM46 hydraulic oil shall be provided in the oil cylinder.
2.18. Gear oil requirements: 220# gear oil shall be provided in the gear box of the leveler.
2.19. Working environment temperature: -10 ~ 40℃.
2.20. Working environment relative humidity: ≤80%(no condensation).
Related Products
cnxhkj@vip.163.com
+8618056308262
+8618056308286
Powered by：www.300.cn Hefei SEO