Metal sheet processing equipment design and manufacturing enterprise
XHV150P-4
1. Overview
1.1, this unit is used for tinplate coiling material unwinding, leveling, waveform shearing special equipment. It is an important equipment to effectively reduce material loss and production cost in canning and cap making industry. The waveform cutting equipment can save 3-8% of materials.
1.2. The wave shear production line is composed of uncoiling machine parts, leveling machine parts, wave shear machine parts, belt conveyor parts, four receiving table, pinhole detector, electrical control cabinet, etc. For different waveforms, the same equipment can be used to cut, and the corresponding mold can be replaced by automatic die changing system. The shear frequency is 150 times/min. Production line is equipped with special microporous testing equipment: photomultiplier pinhole detector, high detection precision.
1.3. The equipment can be randomly selected between single, double, three and four collections.
2. Main technical parameters of the unit
2.1. Shear thickness: 0.15 ~ 0.5mm;
2.2. Wave shear width: 600~1200mm;
2.3. Wave shear length: 460 ~ 1200mm;
2.4. Cutting times: 150 times/min (when the cutting length is 800mm);
2.5. Design speed: 120m/min;
2.6. Bearing capacity of receiving table: 2t;
2.7. Height of receiving table: 460mm(including bracket);
2.8. Shear length error: ≤±0.15mm/m;
2.9. Shearing diagonal error: ≤±0.15mm/m;
2.10. Uncoiler expansion shaft diameter range: φ380 ~ φ420mm(coil inner diameter φ405mm);
2.11. Maximum diameter of coil: φ1800mm:;
2.12. Maximum weight of rolling material: 13.5t;
2.13. Installed capacity: about 121kW;
2.14. The production line covers an area of about 32.1×6.5 meters.
2.15. Power requirements: three-phase five-wire system 380V±5%, 50Hz±2Hz.
2.16. Air source requirements: Provide air source with prepared pressure of 0.6MPa and flow rate of 1m3/min.
2.17. Hydraulic oil requirements: L-HM46 hydraulic oil shall be provided in the oil cylinder.
2.18. Gear oil requirements: 220# gear oil shall be provided in the gear box of the leveler.
2.19. Working environment temperature: -10 ~ 40℃.
2.20. Working environment relative humidity: ≤80%(no condensation).
Related Products
cnxhkj@vip.163.com
+8618056308262
+8618056308286
Powered by：www.300.cn Hefei SEO